Good Morning Everyone,
During the night, I was thinking, and I forgot to add some important suggestions to the cast iron care.
When you get done using your cast iron pans, wait until they cool down, then just wash/rinse in hot water only. The only time you use soap is when you are ready to re-season your pans again, and you want a clean surface for re-seasoning. Soap will remove the oil coating you have baked on. I sometimes have to soap mine up because of some burnt something on the pan, I sometimes use baking soda to soak burnt on food off, just use hot water, and put about a 1/4 cup of baking soda in the water, swish around and leave. You may have to use a brush or a scraper but it will come off. I also use baking soda in my stainless steel pans also. Also, do not add nasty chemical cleaners, first, some things will react to the metal and may do damage to the surface, cast iron is tough, but it is also vulnerable to things also. Like temperature, and chemicals. Thank you Glenda, for the reminder.
Also, the pans I am showing you are my collection, I have new, and newer Lodge and Wagner pans. I also have Wagner, Lodge pans that are over 100+ yrs old from a great grandmother, grandmother and mother.
Some of the pans you see in stores, and on line, are cheap imitations from China, or India. PLEASE, if you are going to spend some money, please buy only Lodge, and Wagner pans. These are original, and will say on the bottom of the pan, Lodge or Wagner. I bought two bread loaf pans directly from the Lodge company. www.Lodgemfg.com. Please, please do purchase good cookware, you will not be sorry. Just purchase one at a time, and this include stainless steel and enamel ware. I have several pieces of enamelware and porcelain. Something I want is a dutch oven ceramic on steel pot. Yes, these are expensive, but what good cookware isn't. They will last your lifetime, and your children and grandchildren. I have the proof in my collection. Chinese imports crap is just that...crap. It is made with inferior metals, and they do not season worth a shit, sorry, but that is what I feel about Chinese imports. Now, you can get french cookware that is good also, but please just look to see if you can find where it is made. I have a french pan, that is beautiful and seasons very well. It is a small saute pan, but is good metal and cooks well also. You just have to be careful, just like purchasing anything that you want to hold up well to everyday cooking.
I hope that I haven't left anything else out. That is part of my problem doing any teaching or tutorials. You do it everyday, and then put a pen or type written word to it, and you forget and miss steps.
Again, please if you have questions, please comment or email me and I will do my best to answer your questions.
Have a great rest of the week.
Hugs
Thursday, January 12, 2012
Wednesday, January 11, 2012
Ta-Da Finally !!!! Cast Iron Tutorial
Good Afternoon Everyone,
Well I am trying to get the tutorial posted. I have been down on and off this last week, the cable company is having issues here. We have a something short somewhere around the neighborhood with cable, and the techs cannot find the problem. Thursday afternoon, I ended up with all new wiring for my cable phone, and Internet, but there is still a glitch somewhere, so I am hoping I can get everything posted before everything goes down and everything I post will be lost in Internet purgatory forever.
Update: Fixed, hopefully. The cable line way down on the main street that runs close to the park had two transmitters failing and was causing a whole lot of trouble clear over to the south side of town. Wow, now that's a problem and a couple of bad gremlins.
Update: Tutorial
Well here goes the tutorial. I hope that I don't mess it up.
Photos posted to the left of the post photos 1-3 show two pans, one is a newer Lodge pan, the other is a newer Wagner 1891 original, these were new ones that were on sale at a farm store that we had here at the time, called Wheelers. I had totally forgotten about these pans, and found them in the storage shed looking for something else. I bought them probably 25 yrs ago, when I first moved back from Denver CO, about summer of 1985. When I moved to the modular, I had put a lot of stuff into storage as I do not have garage here and little room. And then like usual, I forget things.
Well anyway, photos 1-3 show a lot of rust and moisture gunk on these pans, and they look like you should just toss them. If you have pans like these or worse, please do not chuck them, just clean them, and use a little elbow grease and they will come clean and beautiful.
Photos 4-5-6 show the Wagner pan needing a lot of help. Also shown are the tools I use. Now, some people use different tools, for me, this is what I had at hand at the time. I have small wire brushes, a larger wire brush (D's brush, borrowed) a pumice stone, like what you use to get lime deposits off in the commode and in sinks and some drywall sandpaper. Some people use a power sander, or a hand held grinder, but I don't have the nerve or the steady hand to run one. Now, all of this you can find at a good hardware store or Menard's, or Lowes or what ever hardware or man store you have around your area. Some farm goods store carry stuff, like a Tractor Supply. In photo 5, it shows the drywall sandpaper. I had 180 grit and 120 grit. Now, the higher the grit, (180) the finer the sanding, the 120 grit is a coarser paper. All this is, is sandpaper used on drywall to smooth it out before prepping. I am sure lumberyards carry this also. All you do is, take your brushes, and clean the surface of the pan, don't gouge into the pan, just scrape the bad spots, and rust off. I use the big wire brush first, to clean the majority of the rust and dirt off, then dump the gunk out, then take your small brushes, and clean rough spots off, getting into the rounded edges and handle. If you have some spots that the brush can't get, use your pumice stone, and lightly rub out the spots. Then take your grit paper, and rub the bottom, sides, and inside if needed until you have a clean surface, shown in photo 6. Remembering, not to gouge the surface. Cast iron is very durable, but you can gouge, and scratch too much getting stuff off. If it needs a little soaking, use HOT water, and dish soap, to soak it a little, and then brush out the gunk and crap out. It depends on how dirty your pan is. Photo 7 shows you the pan after the drywall paper has been used, and it cleaned up pretty good. Photo 8 just shows the Lodge pan is really rusty and rough, but you will see later, it is clean and comes out very nicely.
Photo 9 and 10 are a little mixed. 9 is the pan being washed in hot water and soap, and I use my little dish brush to scrub the surface and really get it clean. You may have to wash and soap up several times to get a clean surface and no rusty deposits on a clean towel or paper towel. You want it as clean as you can get it. Photo 10 is just the pan inside again, cleaned with the wire brush, and the pumice stone and the drywall paper. I think that I used 180 grit on this.
Photo 11 and 12 show the pan freshly washed. I washed this about 5 times, to make sure all grit and surface dirt is out of it. Photo 12 shows the application of a vegetable oil. Now, here is where there are differences with people. Now I use Crisco solid shortening. I take a blob on my fingers and just smear it all over the surface. Coat inside and outside, even handle. It helps also if the pan is warm from its bath in hot water. Make sure every inch is covered in shortening. Now my grandmother at the time used bacon grease. I find it leaves a rancid odor after a while, maybe its me, but it puts me off. I have always used shortening. I am going to experiment with using a liquid vegetable oil and see how it turns out. I have a few more pans to clean and season. I have found that liquid vegetable oil leaves a stickier bond than shortening, but that's me.
Photo 13 shows the pan in the oven with the shortening coating. Now I bake my pans at 350*F for several hours. Now, if you get more shortening in your pan, let it bake a little, then take a paper towel, make sure you have several layers, and be careful of burning yourself. Mop up some of the shortening that is pooling, what you want is a smooth surface, not globs of vegetable oil pooled on the surface, because, as the pan heats, the vegetable oil forms a bond somewhat like a polymer, and it bonds with the metal, so to speak, and as it bakes, it produces a smooth, lustrous surface, which forms the non stick surface that you want in cast iron. Throughout the baking, keep checking your pans and distribute the oil throughout the pan surface and the back also, use your hot pads and take it out, and coat spots that show less oil, you will see the spots that you have missed. As it bakes, it should not be sticky, but getting slick, again, sop up oil that is pooling. Now, new pans and older pans, as you use them more, and more, will produce a beautiful black, slick surface, and if you take care of them, and when you are done cooking with them, let them cool, and then just clean with hot water and a sink brush and you are good to go. Newer pans you have to use for a few times, then you need to re-season them to keep them in shape. But I assure you, as you use them more, they will turn black, and get better with use and age. Also, PLEASE, do not wash a hot pan right after cooking, it WILL warp the pan and sometimes break it, from a temperature fluctuation. So please do not wash a hot pan. It is also dangerous. Also, when you are baking these pans, it will give off an odor, and if you have fire alarms, sometimes, it will make them go off. I know some may complain of the odor, but this is the oil and the pan. As you get your pans in shape, you won't have to do too much if this. Just some normal common sense care. You may have complaining occupants in the house also, so open the windows, or run the vent fans or overhead fans.
Photo 14 and 15 show a finished pan. Photo 14 is right out of the oven, with a going over of a paper towel to catch some small spots of pooled oil. Photo 15 is the pan, cooled off for about an hour, and I buffed it with an old kitchen towel.
Now, I am using this pan, and I will have to re-season it, What you have to do is make sure that the oil penetrates the surface and forms the bond to the cast iron. It takes time, but it is so worth it.
Well, that is my tutorial. I am sorry that it may seem a little ADD, but I hope that it explains the steps. Please, if you have any questions, please email or make a comment, and I will get back to you to answer your questions.
Well, I am tired, and I have a new magazine to read, so I may get ready to head for the feathers and see what other problems I can come up with. I hope that you enjoy the tutorail.
Enjoy and hugs to all.
Well I am trying to get the tutorial posted. I have been down on and off this last week, the cable company is having issues here. We have a something short somewhere around the neighborhood with cable, and the techs cannot find the problem. Thursday afternoon, I ended up with all new wiring for my cable phone, and Internet, but there is still a glitch somewhere, so I am hoping I can get everything posted before everything goes down and everything I post will be lost in Internet purgatory forever.
Update: Fixed, hopefully. The cable line way down on the main street that runs close to the park had two transmitters failing and was causing a whole lot of trouble clear over to the south side of town. Wow, now that's a problem and a couple of bad gremlins.
Update: Tutorial
Well here goes the tutorial. I hope that I don't mess it up.
Photos posted to the left of the post photos 1-3 show two pans, one is a newer Lodge pan, the other is a newer Wagner 1891 original, these were new ones that were on sale at a farm store that we had here at the time, called Wheelers. I had totally forgotten about these pans, and found them in the storage shed looking for something else. I bought them probably 25 yrs ago, when I first moved back from Denver CO, about summer of 1985. When I moved to the modular, I had put a lot of stuff into storage as I do not have garage here and little room. And then like usual, I forget things.
Well anyway, photos 1-3 show a lot of rust and moisture gunk on these pans, and they look like you should just toss them. If you have pans like these or worse, please do not chuck them, just clean them, and use a little elbow grease and they will come clean and beautiful.
Photos 4-5-6 show the Wagner pan needing a lot of help. Also shown are the tools I use. Now, some people use different tools, for me, this is what I had at hand at the time. I have small wire brushes, a larger wire brush (D's brush, borrowed) a pumice stone, like what you use to get lime deposits off in the commode and in sinks and some drywall sandpaper. Some people use a power sander, or a hand held grinder, but I don't have the nerve or the steady hand to run one. Now, all of this you can find at a good hardware store or Menard's, or Lowes or what ever hardware or man store you have around your area. Some farm goods store carry stuff, like a Tractor Supply. In photo 5, it shows the drywall sandpaper. I had 180 grit and 120 grit. Now, the higher the grit, (180) the finer the sanding, the 120 grit is a coarser paper. All this is, is sandpaper used on drywall to smooth it out before prepping. I am sure lumberyards carry this also. All you do is, take your brushes, and clean the surface of the pan, don't gouge into the pan, just scrape the bad spots, and rust off. I use the big wire brush first, to clean the majority of the rust and dirt off, then dump the gunk out, then take your small brushes, and clean rough spots off, getting into the rounded edges and handle. If you have some spots that the brush can't get, use your pumice stone, and lightly rub out the spots. Then take your grit paper, and rub the bottom, sides, and inside if needed until you have a clean surface, shown in photo 6. Remembering, not to gouge the surface. Cast iron is very durable, but you can gouge, and scratch too much getting stuff off. If it needs a little soaking, use HOT water, and dish soap, to soak it a little, and then brush out the gunk and crap out. It depends on how dirty your pan is. Photo 7 shows you the pan after the drywall paper has been used, and it cleaned up pretty good. Photo 8 just shows the Lodge pan is really rusty and rough, but you will see later, it is clean and comes out very nicely.
Photo 9 and 10 are a little mixed. 9 is the pan being washed in hot water and soap, and I use my little dish brush to scrub the surface and really get it clean. You may have to wash and soap up several times to get a clean surface and no rusty deposits on a clean towel or paper towel. You want it as clean as you can get it. Photo 10 is just the pan inside again, cleaned with the wire brush, and the pumice stone and the drywall paper. I think that I used 180 grit on this.
Photo 11 and 12 show the pan freshly washed. I washed this about 5 times, to make sure all grit and surface dirt is out of it. Photo 12 shows the application of a vegetable oil. Now, here is where there are differences with people. Now I use Crisco solid shortening. I take a blob on my fingers and just smear it all over the surface. Coat inside and outside, even handle. It helps also if the pan is warm from its bath in hot water. Make sure every inch is covered in shortening. Now my grandmother at the time used bacon grease. I find it leaves a rancid odor after a while, maybe its me, but it puts me off. I have always used shortening. I am going to experiment with using a liquid vegetable oil and see how it turns out. I have a few more pans to clean and season. I have found that liquid vegetable oil leaves a stickier bond than shortening, but that's me.
Photo 13 shows the pan in the oven with the shortening coating. Now I bake my pans at 350*F for several hours. Now, if you get more shortening in your pan, let it bake a little, then take a paper towel, make sure you have several layers, and be careful of burning yourself. Mop up some of the shortening that is pooling, what you want is a smooth surface, not globs of vegetable oil pooled on the surface, because, as the pan heats, the vegetable oil forms a bond somewhat like a polymer, and it bonds with the metal, so to speak, and as it bakes, it produces a smooth, lustrous surface, which forms the non stick surface that you want in cast iron. Throughout the baking, keep checking your pans and distribute the oil throughout the pan surface and the back also, use your hot pads and take it out, and coat spots that show less oil, you will see the spots that you have missed. As it bakes, it should not be sticky, but getting slick, again, sop up oil that is pooling. Now, new pans and older pans, as you use them more, and more, will produce a beautiful black, slick surface, and if you take care of them, and when you are done cooking with them, let them cool, and then just clean with hot water and a sink brush and you are good to go. Newer pans you have to use for a few times, then you need to re-season them to keep them in shape. But I assure you, as you use them more, they will turn black, and get better with use and age. Also, PLEASE, do not wash a hot pan right after cooking, it WILL warp the pan and sometimes break it, from a temperature fluctuation. So please do not wash a hot pan. It is also dangerous. Also, when you are baking these pans, it will give off an odor, and if you have fire alarms, sometimes, it will make them go off. I know some may complain of the odor, but this is the oil and the pan. As you get your pans in shape, you won't have to do too much if this. Just some normal common sense care. You may have complaining occupants in the house also, so open the windows, or run the vent fans or overhead fans.
Photo 14 and 15 show a finished pan. Photo 14 is right out of the oven, with a going over of a paper towel to catch some small spots of pooled oil. Photo 15 is the pan, cooled off for about an hour, and I buffed it with an old kitchen towel.
Now, I am using this pan, and I will have to re-season it, What you have to do is make sure that the oil penetrates the surface and forms the bond to the cast iron. It takes time, but it is so worth it.
Well, that is my tutorial. I am sorry that it may seem a little ADD, but I hope that it explains the steps. Please, if you have any questions, please email or make a comment, and I will get back to you to answer your questions.
Well, I am tired, and I have a new magazine to read, so I may get ready to head for the feathers and see what other problems I can come up with. I hope that you enjoy the tutorail.
Enjoy and hugs to all.
Monday, January 9, 2012
A Delay in posting
Good Morning Everyone,
I am trying to type fast as I have been having internet problems and I need to work fast so I don't loose anything.
I will work on my cast iron post, when they find the gremlins in the lines, but now, I don't dare.
I just wanted to let all of you know, so you wouldn't think I was a slacker!
Hopefully the cable techs will find the issue, it is somewhere along the cable lines. Thursday, I had all new cable strung around my home and to the computer and phone, but there is still a glitch somewhere, again, my mantra, Murphy's Law.
I will be back as soon as they get the gremlin(s).
Hugs
I am trying to type fast as I have been having internet problems and I need to work fast so I don't loose anything.
I will work on my cast iron post, when they find the gremlins in the lines, but now, I don't dare.
I just wanted to let all of you know, so you wouldn't think I was a slacker!
Hopefully the cable techs will find the issue, it is somewhere along the cable lines. Thursday, I had all new cable strung around my home and to the computer and phone, but there is still a glitch somewhere, again, my mantra, Murphy's Law.
I will be back as soon as they get the gremlin(s).
Hugs
Tuesday, January 3, 2012
The boring and the exciting
Good Evening Everyone,
Well, just a note that I am still working on the cast iron tutorial. I have had to do a few important things the last few days and I have gotten behind. You know, life gets in the road, and general family issues, though not major, still, little things that have to be done, so I can concentrate and make a good presentation...Not sure of that but I will try. I do not like to get rushed when I am doing things, and I want to present them right to all, not just something that is a slacker done project.
Well first, do you remember my last post that we had a little excitement around here.....WELL, the drug dealer got busted Friday the 30th. We didn't even know what went down until we got back running a few errands. We left about 11:30 am to go and check my mailbox at the UPS store, (I do not receive my mail here at all, as you know why) and then we needed to go get a serpentine belt for my caddy and then we stopped by my folks to check on them and see if they needed anything as I did not want them out in the mess around town before the drunk golden hoard was let out of their cages, then home. Got home at about 1 pm, let the dog out, put her back in, and then D and I went around back to pull out the caddy and the pickup and work on the car. We stepped to the back, and seen a Dodge 4 wheel drive parked and didn't make anything of it. Went to work on the belt and about a half hour later, I looked up and seen two ICE feds go to the Dodge, taking off their flack jackets and holsters. I almost pee'd my undies, couldn't believe it. After all these years, (about 6) he finally got busted.
The only issue was, we had feds all over the place until late in the afternoon, and then quiet, peace, no running in and out and vehicles at all hours running in the back. WOW I am not sure if this solves the problem or not. The owner's mouthpiece was here later in the afternoon and he was very shook up about having "Feds"crawling around, Hummmmmmm.
So now, its very quiet here. Not a soul stirring around at all.
So that is the news around here for now. I just wanted to pop in and mention the news. I didn't want to spoil New Years so I wanted to wait until a few days was past to mention this.
I will leave and promise to get the cast iron post going here. Thank you again for your visits and I will get back later.
Love and Hugs to All
Well, just a note that I am still working on the cast iron tutorial. I have had to do a few important things the last few days and I have gotten behind. You know, life gets in the road, and general family issues, though not major, still, little things that have to be done, so I can concentrate and make a good presentation...Not sure of that but I will try. I do not like to get rushed when I am doing things, and I want to present them right to all, not just something that is a slacker done project.
Well first, do you remember my last post that we had a little excitement around here.....WELL, the drug dealer got busted Friday the 30th. We didn't even know what went down until we got back running a few errands. We left about 11:30 am to go and check my mailbox at the UPS store, (I do not receive my mail here at all, as you know why) and then we needed to go get a serpentine belt for my caddy and then we stopped by my folks to check on them and see if they needed anything as I did not want them out in the mess around town before the drunk golden hoard was let out of their cages, then home. Got home at about 1 pm, let the dog out, put her back in, and then D and I went around back to pull out the caddy and the pickup and work on the car. We stepped to the back, and seen a Dodge 4 wheel drive parked and didn't make anything of it. Went to work on the belt and about a half hour later, I looked up and seen two ICE feds go to the Dodge, taking off their flack jackets and holsters. I almost pee'd my undies, couldn't believe it. After all these years, (about 6) he finally got busted.
The only issue was, we had feds all over the place until late in the afternoon, and then quiet, peace, no running in and out and vehicles at all hours running in the back. WOW I am not sure if this solves the problem or not. The owner's mouthpiece was here later in the afternoon and he was very shook up about having "Feds"crawling around, Hummmmmmm.
So now, its very quiet here. Not a soul stirring around at all.
So that is the news around here for now. I just wanted to pop in and mention the news. I didn't want to spoil New Years so I wanted to wait until a few days was past to mention this.
I will leave and promise to get the cast iron post going here. Thank you again for your visits and I will get back later.
Love and Hugs to All
Saturday, December 31, 2011
Happy New Year Everyone
Good Morning All,
I just wanted to wish everyone a most joyous New Year's Eve and New Year's Day where ever you are in the world.
It will be very quite here at the house. We don't drink or party so its movies and caramel popcorn, and a something? supper from the freezer or pantry.
I have another post going but I didn't want to post it until I finish cleaning my cast iron. I want to do a short tutorial on taking care of cast iron and seasoning it.
We had a little excitement here late yesterday morning and early afternoon but I did not want to post it on the New Year's post, I didn't want to ruin the New Year. But I will tell all of you with the cast iron post. It was interesting.
Well, I get going, I have a few errands to do, and I really don't want to be out, because around here, drinking is huge and it gets dangerous being out, and the cops will be out in force, and will be around here because of what we had happen yesterday, so I will take my leave of all and I wish all a blessed 2012 and productive gardens and pantries full of produce and freezers full of wonderful eats. I also pray for peace, and tolerance for 2012, Lord knows, we need it so badly.
We also need guidance and prayer for our country, and our government, it REALLY needs help!
Love and Hugs to All
I just wanted to wish everyone a most joyous New Year's Eve and New Year's Day where ever you are in the world.
It will be very quite here at the house. We don't drink or party so its movies and caramel popcorn, and a something? supper from the freezer or pantry.
I have another post going but I didn't want to post it until I finish cleaning my cast iron. I want to do a short tutorial on taking care of cast iron and seasoning it.
We had a little excitement here late yesterday morning and early afternoon but I did not want to post it on the New Year's post, I didn't want to ruin the New Year. But I will tell all of you with the cast iron post. It was interesting.
Well, I get going, I have a few errands to do, and I really don't want to be out, because around here, drinking is huge and it gets dangerous being out, and the cops will be out in force, and will be around here because of what we had happen yesterday, so I will take my leave of all and I wish all a blessed 2012 and productive gardens and pantries full of produce and freezers full of wonderful eats. I also pray for peace, and tolerance for 2012, Lord knows, we need it so badly.
We also need guidance and prayer for our country, and our government, it REALLY needs help!
Love and Hugs to All
Saturday, December 24, 2011
A Blessed Merry Christmas to All
Good Afternoon Everyone,
I stopped from kitchen duties to wish all of my blogs readers, wonderful blog friends, and and my European blog friends a most joyous Holiday/Merry Christmas/Yule season.
I also want to thank all of you for your wonderful comments, emails, readership and just wonderful companionship through the year. I feel so, so blessed to have readers from all over the world. I learn so very much from all of you, and all that you share of your lives, recipes, and just daily living.
I am currently in the kitchen making Ilene's Hot Milk Sponge Cake. Ilene has a wonderful, fun, to the point blog called "The Rock Whisperer. Ilene lives in Oklahoma and has wonderful, recipes and just good fellowship. Please find her blog on my blog and go visit. If you want to make her hot milk cake, just go to her blog, find recipe index, and she has it listed there. It is a wonderful, cake, and it looks so good right now in the oven, can't wait to eat it. Its for the Holiday table here. Then comment that you tried her cake.
I am also cleaning my cast iron cookware along with the kitchen and baking, since I have the oven fired up. I have my great-grandmother's and grandmother's cast iron Lodge, and Wagner cookware and it is something I treasure the most in my kitchen. I will post pictures after the first of the year. I am going to take a little break from the computer, and try to come up with some different things for the blog, and I think that taking care of cast iron cookware may be the first for the next year. Yes it takes a little time to season it, but nothing more than what you normally do in a kitchen, in fact, along with Ilene's cake, I have a small and medium fry pan in with it curing. Kill two birds with one stone.
I will try to learn to post better, try to come up with interesting things. My problem is, right now, my weather is very cold. Can't talk about the garden, maybe when I start seeding, and setting up my make shift cold frames I can talk more. Again, I am a boring individual, not too much going on in my life but the bills. No snow, and in fact it is down right nice for us. We are supposed to hit 40* F today and throughout the next week. Some days next week will be in the 50's. Wow, that's pretty warm for us in January, when it usually is below zero till the end of January and first part of February.
I have been sand bagging a little on all of your blogs. I have been somewhat busy, just doing everyday things. Have been a little stoved up with arthritis and in the mornings, I just plain crip around, but I get going, have a few cups of coffee, or tea and then an aspirin and away I go, but by late afternoon, evening, I am painful and ready to call it a day.
Well, I can smell the cake, yum, I can hardly wait. So I had better get off my rear and get it out.
Again, I wish everyone a wonderful, peaceful, Christmas Holiday for all of you and many blessing in the coming year.
Thank you for your following and friendship.
Love and Hugs to all
I stopped from kitchen duties to wish all of my blogs readers, wonderful blog friends, and and my European blog friends a most joyous Holiday/Merry Christmas/Yule season.
I also want to thank all of you for your wonderful comments, emails, readership and just wonderful companionship through the year. I feel so, so blessed to have readers from all over the world. I learn so very much from all of you, and all that you share of your lives, recipes, and just daily living.
I am currently in the kitchen making Ilene's Hot Milk Sponge Cake. Ilene has a wonderful, fun, to the point blog called "The Rock Whisperer. Ilene lives in Oklahoma and has wonderful, recipes and just good fellowship. Please find her blog on my blog and go visit. If you want to make her hot milk cake, just go to her blog, find recipe index, and she has it listed there. It is a wonderful, cake, and it looks so good right now in the oven, can't wait to eat it. Its for the Holiday table here. Then comment that you tried her cake.
I am also cleaning my cast iron cookware along with the kitchen and baking, since I have the oven fired up. I have my great-grandmother's and grandmother's cast iron Lodge, and Wagner cookware and it is something I treasure the most in my kitchen. I will post pictures after the first of the year. I am going to take a little break from the computer, and try to come up with some different things for the blog, and I think that taking care of cast iron cookware may be the first for the next year. Yes it takes a little time to season it, but nothing more than what you normally do in a kitchen, in fact, along with Ilene's cake, I have a small and medium fry pan in with it curing. Kill two birds with one stone.
I will try to learn to post better, try to come up with interesting things. My problem is, right now, my weather is very cold. Can't talk about the garden, maybe when I start seeding, and setting up my make shift cold frames I can talk more. Again, I am a boring individual, not too much going on in my life but the bills. No snow, and in fact it is down right nice for us. We are supposed to hit 40* F today and throughout the next week. Some days next week will be in the 50's. Wow, that's pretty warm for us in January, when it usually is below zero till the end of January and first part of February.
I have been sand bagging a little on all of your blogs. I have been somewhat busy, just doing everyday things. Have been a little stoved up with arthritis and in the mornings, I just plain crip around, but I get going, have a few cups of coffee, or tea and then an aspirin and away I go, but by late afternoon, evening, I am painful and ready to call it a day.
Well, I can smell the cake, yum, I can hardly wait. So I had better get off my rear and get it out.
Again, I wish everyone a wonderful, peaceful, Christmas Holiday for all of you and many blessing in the coming year.
Thank you for your following and friendship.
Love and Hugs to all
Saturday, December 17, 2011
William F Cody (Buffalo Bill) home decorated for the Holidays
Good Evening Everyone,
I just got back a little while ago, to go out and take pictures of William F Cody's home, which is only about a mile away from my home. Every year, the Nebraska Game and Parks decorates his home for the holidays and for a few days, you can go out and tour the home, and they put on chestnut roasts, and serve holiday hot cocoa and coffee, tea.
Yep, I live in the community where Buffalo Bill lived. This home was a beacon for the elite of the world during his time. There were extravagant parties held here, and a lot of general elite mingling and A list participants.
I thought you all would enjoy it. I hope the photos turn out, its very hard to take photos at night. But you can't see the lights during the day. This photo was the best I could get. Sorry.
I will see if I can go out to get a daytime photo of his home and the huge barn.
Enjoy!
I just got back a little while ago, to go out and take pictures of William F Cody's home, which is only about a mile away from my home. Every year, the Nebraska Game and Parks decorates his home for the holidays and for a few days, you can go out and tour the home, and they put on chestnut roasts, and serve holiday hot cocoa and coffee, tea.
Yep, I live in the community where Buffalo Bill lived. This home was a beacon for the elite of the world during his time. There were extravagant parties held here, and a lot of general elite mingling and A list participants.
I thought you all would enjoy it. I hope the photos turn out, its very hard to take photos at night. But you can't see the lights during the day. This photo was the best I could get. Sorry.
I will see if I can go out to get a daytime photo of his home and the huge barn.
Enjoy!
Subscribe to:
Posts (Atom)